DB Fire Safety Limited are proud to be exhibiting at The Business Show 2018.
This exhibition is being held at the ExCel, London on Wednesday & Thursday 16th & 17th, May.
The Business Show is the biggest business event in Europe with over 350 exhibitors and 250 speakers. It offers ideal opportunities for business owners to pick up tips and insights into the best practices required to ensure your business is successful.
David Black from DB Fire Safety Limited will be available, on stand 168, to provide advice on the appropriate fire safety measures required under fire safety legislation. He is already looking forward to meeting many existing and new business owners.
If you wish to contact David prior to the show, you can call him on 0800 772 0559; or email email@example.com.
Since the appalling tragedy at Grenfell Tower, there has been a great deal of discussion about fire safety in blocks of flats. These discussions have placed great emphasis around the use of cladding to the exterior walls of buildings. Whilst this is, quite naturally, an important issue, David Black, of DB Fire Safety Ltd, believes that there are other important considerations when assessing the level of fire safety in a block of flats.
DB Fire Safety are involved heavily with building contractors converting disused office buildings into blocks of residential flats. David, therefore, has great experience in helping to develop the appropriate fire strategies and on-goiung fire risk assessments of such buildings.
The general rule is that all flats must be contained within a one-hour fire resisting border. This means that floors, ceilings and walls are of a substantial construction. It also means that if a partition wall is designed to provide one-hour fire separation, any door within that wall must also be fire-rated to 60 minutes. In addition, all fire doors must be installed using appropriately fire-resisting hinges. Entrance doors to flats should be installed with a suitable self-closing device; and intumescent strips & cold smoke seals must be rebated into either the door or the door frame. They should also be fitted with a single thumb-turn device to enable prompt and safe evacuation in the event of a fire emergency.
David also believes that all blocks of flats should have the benefit of a fire detection & alarm system with automatic fire detection throughout the common escape routes but also with a heat detector immediately inside the entrance to all flats. He also believes that manual alarm call points should be installed at appropriate locations throughout the building. All this will enable residents to easily raise an alarm in the event of a fire emergency (so alerting all occupants of the building immediately); it will also provide alerts to all occupants in the event of a fire occurring in an unoccupied flat.
Other considerations include the need for a smoke extraction system that will allow all escape routes to be clear of smoke and so provide reasonable visibility in the event of a need to evacuate the building.
Finally, David believes that procedures issued to residents in a block of flats should include the instruction to evacuate from the building if it is safe to do so. In other words, only to remain within the flat if evacuation from the building is impeded by the fire itself.
If you wish to discuss areas in which DB Fire Safety can be of assistance to you or your business, then please call 0800 772 0559 OR Email: firstname.lastname@example.org
Do you realise that you might be responsible for fire safety in your premises. The Fire Safety Order 2005 requires that all businesses appoint a ‘Responsible Person‘ for their premises. Regardless of how small the business may be this is a statutory requirement.. In general it would be the business owner, but it might also be the manager of the premises.
The starting point for all business owners and building managers is to carry out a suitable and sufficient fire risk assessment. The Responsible Person must ensure that all persons who might be on their premises would be safe and protected in the event of a fire emergency. Consideration must be taken of visitors as well as staff
A great deal of attention is currently being placed on the cladding installed on the outside of high-rise buildings. However, the fire safety provision inside your premises is likely to be of greater importance in the initial stages of any fire. It is critically important that all persons who might be on your premises can evacuate promptly and safely within secure and protected escape routes.
This is the reason why it is a statutory requirement to assess the potential causes of fire, the potential risks that could allow a fire to develop and spread, and the control measures you have in place.
Areas that must be included in any fire risk assessment include:
sufficient provision of, and correct installation of, fire doors
fire partition walls
suitable means to raise a fire alarm
accountability for all persons
an appropriate fire strategy
David Black of DB Fire Safety Limited is hosting a seminar on Friday 30th June entitled ‘Fire Safety & Your Fire Risk Assessment’. This seminar, which is FREE to attend, will provide business owners and property managers with the relevant information and tools to fully understand the fire hazards and risks that are likely to be present in their premises. It will also provide the necessary tools for owners of small businesses to carry out their own fire risk assessments.
The seminar will help you understand the importance of fire safety in your premises and will run from 10:00 – 12:00 with tea/coffee on arrival from 09:30
To register for your FREE tickets please go on the attached Eventbrite link.
Legislation requires that all employers provide appropriate health & safety training to all staff. This includes providing fire safety training instruction as part of the induction program for all new members of staff. Ideally, all health & safety and fire safety induction training should take place on the first day of employment. Good practice is to include fire safety procedures within the Company Staff Handbook (if provided).
As a minimum, the fire safety training, provided as part of general induction, should include a tour of the premises to identify the following:
1. The location of all fire alarm call points and instruction on how to activate them
2. The location of all fire exits and instruction on how to open them
3. The location of the Assembly Point in the event of an emergency evacuation
4.Instruction in the company’s documented procedures to be followed in the event of either discovering a fire, or hearing the fire alarm.
In addition to the above, it is generally considered to be beneficial to provide all staff with training/instruction in general fire safety awareness. If staff are aware of the fire hazards and risks in their areas of work, they can help prevent a fire from occurring in the first place. Probably a good idea!!!
It may also be appropriate to appoint specific individuals as Fire Marshals or Wardens; to have particular responsibilities in the event of a fire (more information on this will be in my next blog).
DB Fire Safety Limited offers training courses in all aspects of fire safety including: Fire Safety Awareness and Fire Warden Training. We also provide specialist training to staff working in Residential Care Homes (more information on this will be in a future blog).